20.mm1
Flanged and grooved wheel, solid brass, no recess | 20.mm
As above, rough cast brass, recessed both faces (36g) | 20.mm2
As above, with both feather and tongue slots | 20.mm2a
As above, with central bar across face |
20.mm2b
With central bar across face, tongue key only | 20.mm2c
As above, but cast alloy | 20.mm3
All machined, tongue only, four spokes (weight 22g) | 20.mm4
All faces machined, four holes instead of spokes (26g) |
20.go
Lead alloy, 'gold' finished, boss with four buttresses (45g) | 20.mm5
Formed from two pressings, 1911 patent boss | 20.mm5a
As above but eight holes, 'Meccano patent' boss | 20.br1
As above but four holes, boss reversed from now on |
20.br1a
As above but eight holes | 20.br2
As above but with standard-type boss, 9/32'' flange | 20.br2a
As above but with 7/32'' flange | 20.br2b
As above but outer rim smaller and rounded |
20.st
As above but steel face, bronzed. Rims similar sizes | 20.br3
No pulley section, one-part pressing 1 3/8'' dia. | 20.ni
As above, steel pressing nickel plated | 20.br3a
As .br3, sharp at flange/rim, flange under ¼'' |
20.br3b
As above, larger, curve at flange/rim, flange ¼'' | 20.br4
As .br3 above, double-tapped | 20.br5
1 3/8'' diameter, ¼'' flange, double-tapped | 20.br5a
As above, squared-off rim and flange |
20.nb
1 3/8'' diameter steel pressing, blue | 20.nb1
1 3/8'' diameter steel pressing, blue with blue boss | 20.re
As above but red | 20.br
As above but all brass (most common variety) |
20.bs
As above, but blackened steel | 20.bk
Mazac one-piece casting, painted black | 20.bk1
As above but brass boss | 20.br6
As above but all-brass casting |
20.zn
Cast alloy, zinc plated | 20.xx
Cast alloy with brass boss, raised lettering inside |